Budżety konta

Budżety konta kontrolują, ile konto może wydać w określonym czasie, przez definiowanie właściwości budżetu, takich jak limit wydatków, czas rozpoczęcia i czas zakończenia. Muszą wskazywać jedną z konfiguracji płatności na koncie, aby określić, które konto płatności zostanie obciążone. AccountBudget możesz tworzyć, aktualizować i usuwać w interfejsie Google Ads API, wysyłając obiekty AccountBudgetProposal.

Obiekty AccountBudget reprezentują końcowy wynik zastosowania propozycji. Po zatwierdzeniu propozycji zmiany (z uwzględnieniem ewentualnych korekt) spowodują utworzenie nowego budżetu konta lub aktualizację dotychczasowego. Zależy to od parametru proposal_type określonego w żądaniu.

AccountBudgetProposalType Opis
CREATE Tworzy nowy budżet konta, który musi zostać zatwierdzony przed użyciem.
UPDATE Modyfikuje istniejący budżet konta.
END Ustawia czas zakończenia budżetu konta na bieżący czas.
REMOVE Usuwa budżet konta przed jego czasem rozpoczęcia.

W sekcjach poniżej opisujemy działanie poszczególnych typów ofert pakietowych.

Tworzenie oferty pakietowej budżetu konta

Utworzenie nowego budżetu konta pozwala kontrolować wydatki klienta. Użyj AccountBudgetProposalService, aby utworzyć nowy AccountBudgetProposal. Aby określić, że należy utworzyć nowy budżet, ustaw parametr proposal_type na CREATE. Informacje o innych operacjach znajdziesz w sekcji Zarządzanie w tym przewodniku.

Pamiętaj, aby użyć konfiguracji płatności z kontem płatności, do którego masz uprawnienia do zapisu. Szczegółowe informacje znajdziesz w przewodniku po konfiguracji płatności.

Poniższy przykład pokazuje, jak utworzyć nową propozycję budżetu.

Java

private void runExample(GoogleAdsClient googleAdsClient, long customerId, long billingSetupId) {
  // Creates an AccountBudgetProposal. This will be reviewed offline by Google Ads, and if
  // approved will become an AccountBudget.
  AccountBudgetProposal proposal =
      AccountBudgetProposal.newBuilder()
          .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
          .setProposalType(AccountBudgetProposalType.CREATE)
          .setProposedName("Account Budget (example)")

          // Specifies the account budget starts immediately.
          .setProposedStartTimeType(TimeType.NOW)
          // Alternatively you can specify a specific start time. Refer to the
          // AccountBudgetProposal
          // resource documentation for allowed formats.
          //
          // .setProposedStartDateTime("2020-01-02 03:04:05")

          // Specifies that the budget runs forever.
          .setProposedEndTimeType(TimeType.FOREVER)
          // Alternatively you can specify a specific end time. Allowed formats are as above.
          // .setProposedEndDateTime("2021-02-03 04:05:06")

          // Optional: sets notes for the budget. These are free text and do not effect budget
          // delivery.
          // .setProposedNotes("Received prepayment of $0.01")

          // Sets the spending limit to 0.01, measured in the Google Ads account currency.
          .setProposedSpendingLimitMicros(10_000)

          // Optional: sets PO number for record keeping. This value is at the user's
          // discretion, and has no effect on Google Billing & Payments.
          // .setProposedPurchaseOrderNumber("PO number 12345")
          .build();

  // Creates an operation which will add the new AccountBudgetProposal.
  AccountBudgetProposalOperation operation =
      AccountBudgetProposalOperation.newBuilder().setCreate(proposal).build();

  try (AccountBudgetProposalServiceClient accountBudgetProposalServiceClient =
      googleAdsClient.getLatestVersion().createAccountBudgetProposalServiceClient()) {
    // Sends the request to the Account Budget Proposal Service.
    MutateAccountBudgetProposalResponse response =
        accountBudgetProposalServiceClient.mutateAccountBudgetProposal(
            String.valueOf(customerId), operation);

    System.out.printf(
        "Account budget proposal created: %s.%n", response.getResult().getResourceName());
  }
}

C#

public void Run(GoogleAdsClient client, long customerId, long billingSetupId)
{
    // Get the AccountBudgetProposalServiceClient.
    AccountBudgetProposalServiceClient proposalService =
        client.GetService(Services.V26.AccountBudgetProposalService);

    // Create an AccountBudgetProposal. The proposal will be reviewed offline by Google Ads,
    // and if approved will become an AccountBudget.
    AccountBudgetProposal proposal = new AccountBudgetProposal()
    {
        BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
        ProposalType = AccountBudgetProposalType.Create,
        ProposedName = "Account Budget (example)",

        // Specify the account budget starts immediately
        ProposedStartTimeType = TimeType.Now,
        // Alternatively, you can specify a specific start time. Refer to the
        // AccountBudgetProposal resource documentation for allowed formats.
        //
        //ProposedStartDateTime = "2020-01-02 03:04:05",

        // Specify that the budget runs forever.
        ProposedEndTimeType = TimeType.Forever,
        // Alternatively you can specify a specific end time. Allowed formats are as above.
        //ProposedEndDateTime = "2021-02-03 04:05:06",

        // Optional: set notes for the budget. These are free text and do not effect budget
        // delivery.
        //ProposedNotes = "Received prepayment of $0.01",

        // Set the spending limit to 0.01, measured in the Google Ads account currency.
        ProposedSpendingLimitMicros = 10_000

        // Optional: set PO number for record keeping. This value is at the user's
        // discretion, and has no effect on Google Billing & Payments.
        //ProposedPurchaseOrderNumber = "PO number 12345"
    };

    // Create an operation which will add the new AccountBudgetProposal
    AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
    {
        Create = proposal
    };

    try
    {
        // Send the request to the Account Budget Proposal Service.
        MutateAccountBudgetProposalResponse response = proposalService.
            MutateAccountBudgetProposal(customerId.ToString(), operation);

        // Display the results.
        Console.WriteLine($"Account budget proposal '{response.Result.ResourceName}' " +
            "was created.");
    }
    catch (GoogleAdsException e)
    {
        Console.WriteLine("Failure:");
        Console.WriteLine($"Message: {e.Message}");
        Console.WriteLine($"Failure: {e.Failure}");
        Console.WriteLine($"Request ID: {e.RequestId}");
        throw;
    }
}

PHP

public static function runExample(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    int $billingSetupId
) {
    // Constructs an account budget proposal.
    $accountBudgetProposal = new AccountBudgetProposal([
        'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
        'proposal_type' => AccountBudgetProposalType::CREATE,
        'proposed_name' => 'Account Budget (example)',
        // Specifies the account budget starts immediately.
        'proposed_start_time_type' => TimeType::NOW,
        // Alternatively you can specify a specific start time. Refer to the
        // AccountBudgetProposal class for allowed formats.
        //
        // 'proposed_start_date_time' => '2020-01-02 03:04:05',

        // Specify that the budget runs forever.
        'proposed_end_time_type' => TimeType::FOREVER,
        // Alternatively you can specify a specific end time. Allowed formats are as above.
        // 'proposed_end_date_time' => '2021-02-03 04:05:06',

        // Optional: set notes for the budget. These are free text and do not effect budget
        // delivery.
        // 'proposed_notes' => 'Received prepayment of $0.01',

        // Optional: set PO number for record keeping. This value is at the user's
        // discretion, and has no effect on Google Billing & Payments.
        // 'proposed_purchase_order_number' => 'PO number 12345',

        // Set the spending limit to 0.01, measured in the Google Ads account currency.
        'proposed_spending_limit_micros' => 10000
    ]);

    $accountBudgetProposalOperation = new AccountBudgetProposalOperation();
    $accountBudgetProposalOperation->setCreate($accountBudgetProposal);

    // Issues a mutate request to add the account budget proposal.
    $accountBudgetProposalServiceClient =
        $googleAdsClient->getAccountBudgetProposalServiceClient();
    $response = $accountBudgetProposalServiceClient->mutateAccountBudgetProposal(
        MutateAccountBudgetProposalRequest::build($customerId, $accountBudgetProposalOperation)
    );

    printf(
        "Added an account budget proposal with resource name '%s'.%s",
        $response->getResult()->getResourceName(),
        PHP_EOL
    );
}

Python

def main(client: GoogleAdsClient, customer_id: str, billing_setup_id: str):
    account_budget_proposal_service = client.get_service(
        "AccountBudgetProposalService"
    )
    billing_setup_service = client.get_service("BillingSetupService")

    account_budget_proposal_operation = client.get_type(
        "AccountBudgetProposalOperation"
    )
    proposal = account_budget_proposal_operation.create

    proposal.proposal_type = client.enums.AccountBudgetProposalTypeEnum.CREATE
    proposal.billing_setup = billing_setup_service.billing_setup_path(
        customer_id, billing_setup_id
    )
    proposal.proposed_name = "Account Budget Proposal (example)"

    # Specify the account budget starts immediately
    proposal.proposed_start_time_type = client.enums.TimeTypeEnum.NOW
    # Alternatively you can specify a specific start time. Refer to the
    # AccountBudgetProposal resource documentation for allowed formats.
    #
    # proposal.proposed_start_date_time = '2020-01-02 03:04:05'

    # Specify that the budget runs forever
    proposal.proposed_end_time_type = client.enums.TimeTypeEnum.FOREVER
    # Alternatively you can specify a specific end time. Allowed formats are as
    # above.
    #
    # proposal.proposed_end_date_time = '2021-01-02 03:04:05'

    # Optional: set notes for the budget. These are free text and do not effect
    # budget delivery.
    #
    # proposal.proposed_notes = 'Received prepayment of $0.01'
    proposal.proposed_spending_limit_micros = 10000

    account_budget_proposal_response = (
        account_budget_proposal_service.mutate_account_budget_proposal(
            customer_id=customer_id,
            operation=account_budget_proposal_operation,
        )
    )
    print(
        "Created account budget proposal "
        f'"{account_budget_proposal_response.result.resource_name}".'
    )

Ruby

def add_account_budget_proposal(customer_id, billing_setup_id)
  # GoogleAdsClient will read a config file from
  # ENV['HOME']/google_ads_config.rb when called without parameters
  client = Google::Ads::GoogleAds::GoogleAdsClient.new


  operation = client.operation.create_resource.account_budget_proposal do |proposal|
    proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
    proposal.proposal_type = :CREATE
    proposal.proposed_name = 'Account Budget (example)'

    # Specify the account budget starts immediately
    proposal.proposed_start_time_type = :NOW
    # Alternatively you can specify a specific start time. Refer to the
    # AccountBudgetProposal resource documentation for allowed formats.
    #
    # proposal.proposed_start_date_time = '2020-01-02 03:04:05'

    # Specify that the budget runs forever.
    proposal.proposed_end_time_type = :FOREVER
    # Alternatively you can specify a specific end time. Allowed formats are as
    # above.
    #
    # proposal.proposed_end_date_time = '2021-01-02 03:04:05'

    # Optional: set notes for the budget. These are free text and do not affect
    # budget delivery.
    #
    # proposal.proposed_notes = 'Received prepayment of $0.01'

    # Set the spending limit to 0.01, measured in the Google Ads account currency.
    proposal.proposed_spending_limit_micros = 10_000
  end

  account_budget_proposal_service = client.service.account_budget_proposal
  # Add budget proposal.
  response = account_budget_proposal_service.mutate_account_budget_proposal(
    customer_id: customer_id,
    operation: operation,
  )

  puts sprintf("Created budget proposal %s.",
      response.results.first.resource_name)
end

Perl

sub add_account_budget_proposal {
  my ($api_client, $customer_id, $billing_setup_id) = @_;

  # Create an account budget proposal.
  my $account_budget_proposal =
    Google::Ads::GoogleAds::V26::Resources::AccountBudgetProposal->new({
      billingSetup =>
        Google::Ads::GoogleAds::V26::Utils::ResourceNames::billing_setup(
        $customer_id, $billing_setup_id
        ),
      proposalType => CREATE,
      proposedName => "Account Budget (example)",
      # Specify that the account budget starts immediately.
      proposedStartTimeType => NOW,
      # Alternatively you can specify a specific start time. Refer to the
      # AccountBudgetProposal class for allowed formats.
      #
      # proposedStartDateTime => "2020-01-02 03:04:05",

      # Specify that the account budget runs forever.
      proposedEndDateTime => FOREVER,
      # Alternatively you can specify a specific end time. Allowed formats are as below.
      # proposedEndDateTime => "2021-02-03 04:05:06",

      # Optional: set notes for the budget. These are free text and do not effect budget
      # delivery.
      # proposedNotes => "Received prepayment of $0.01",

      # Optional: set PO number for record keeping. This value is at the user's
      # discretion, and has no effect on Google Billing & Payments.
      # proposedPurchaseOrderNumber => "PO number 12345",

      # Set the spending limit to 0.01, measured in the Google Ads account currency.
      proposedSpendingLimitMicros => 10000
    });

  # Create an account budget proposal operation.
  my $account_budget_proposal_operation =
    Google::Ads::GoogleAds::V26::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({
      create => $account_budget_proposal
    });

  # Add the account budget proposal.
  my $account_budget_proposal_response =
    $api_client->AccountBudgetProposalService()->mutate({
      customerId => $customer_id,
      operation  => $account_budget_proposal_operation
    });

  printf "Created account budget proposal '%s'.\n",
    $account_budget_proposal_response->{result}{resourceName};

  return 1;
}

curl

W przypadku próśb o propozycję budżetu konta pola proposed_start_date_time i proposed_end_date_time są zawsze podawane w strefie czasowej konta klienta. Nie możesz określić strefy czasowej. Proponowany limit wydatków jest zawsze mierzony w walucie konta.Podaj go w mikrojednostkach, czyli 1,00 PLN = 1 000 000 mikrojednostek.

Opcjonalnie możesz podać numer zamówienia, który będzie widoczny obok tych opłat na fakturze. Nie ma to wpływu na wykorzystanie budżetu.

Usuwanie oczekującej propozycji budżetu konta

Możesz usunąć całą oczekującą ofertę pakietową budżetu, wysyłając żądanie AccountBudgetProposalOperation.remove z nazwą zasobu oferty pakietowej budżetu konta. Pamiętaj jednak, że propozycje budżetu są zwykle stosowane w ciągu kilku minut.

Java
AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder()
  .setRemove(ResourceNames.accountBudgetProposal(customerId, accountBudgetProposalId))
  .build();

// Send request to Google Ads API (not shown).
C#
AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
{
    Remove = ResourceNames.AccountBudgetProposal(customerId, accountBudgetProposalId)
};

// Send request to Google Ads API (not shown).
PHP
$accountBudgetProposalOperation = new AccountBudgetProposalOperation();
$accountBudgetProposalOperation->setRemove(ResourceNames::forAccountBudgetProposal($customerId, $accountBudgetProposalId));

// Send request to Google Ads API (not shown).
Python
account_budget_proposal_service = client.get_service('AccountBudgetProposalService')
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
account_budget_proposal_operation.remove = (
    account_budget_proposal_service.account_budget_proposal_path(
        customer_id, account_budget_proposal_id
    )
)

# Send request to Google Ads API (not shown).
Ruby
operation = client.operation.remove_resource.account_budget_proposal(client.path.account_budget_proposal(customer_id, account_budget_proposal_id))

# Send request to Google Ads API (not shown).
Perl
my $account_budget_proposal_operation =
  Google::Ads::GoogleAds::V26::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({
      remove => Google::Ads::GoogleAds::V26::Utils::ResourceNames::account_budget_proposal(
          $customer_id, $account_budget_proposal_id
        )
    });

# Send request to Google Ads API (not shown).

Jeśli w pierwotnej propozycji popełniono błąd, możesz przesłać ją ponownie jako operację UPDATE. Zapoznaj się z sekcją Aktualizowanie dotychczasowego budżetu konta.

Pobieranie istniejących budżetów konta

To zapytanie w języku Google Ads Query Language (GAQL) pobiera wszystkie budżety konta na danym koncie:

SELECT
  account_budget.resource_name,
  account_budget.id,
  account_budget.name,
  account_budget.status,
  account_budget.billing_setup,
  account_budget.approved_spending_limit_micros,
  account_budget.approved_spending_limit_type,
  account_budget.proposed_spending_limit_micros,
  account_budget.proposed_spending_limit_type,
  account_budget.adjusted_spending_limit_micros,
  account_budget.adjusted_spending_limit_type,
  account_budget.approved_start_date_time,
  account_budget.proposed_start_date_time,
  account_budget.approved_end_date_time,
  account_budget.approved_end_time_type,
  account_budget.proposed_end_date_time,
  account_budget.proposed_end_time_type
FROM
  account_budget

Pola, które zawierają czas rozpoczęcia, czas zakończenia i limit wydatków budżetu konta, mają wiele wariantów z prefiksami takimi jak proposed i approved, które umożliwiają porównanie wartości, które zostały początkowo zaproponowane, z tymi, które zostały zatwierdzone. Limit wydatków ma dodatkowe pola z prefiksem adjusted, które wskazują aktualny limit wydatków obowiązujący po zastosowaniu korekt do zatwierdzonej kwoty.

Zatwierdzony limit wydatków budżetu konta może być z czasem dostosowywany, aby odzwierciedlać różne środki, np. za nadmierne wyświetlenia reklam, nieprawidłowe kliknięcia i kupony promocyjne. Więcej informacji o budżetach konta oraz o środkach i korektach na koncie znajdziesz w Centrum pomocy Google Ads.

Wszystkie nowe budżety konta oczekujące na zatwierdzenie oraz wszystkie dotychczasowe budżety konta, które mają oczekujące aktualizacje, będą też wypełniać zagnieżdżony komunikat pending_proposal, którego pola podrzędne można wybrać w zapytaniu GAQL (np. account_budget_proposal, o który można wysłać zapytanie jako account_budget.pending_proposal.account_budget_proposal, aby uzyskać nazwę zasobu powiązanego obiektu AccountBudgetProposal).

Zarządzanie dotychczasowymi budżetami konta

Po utworzeniu budżetu konta klienta możesz zarządzać jego parametrami za pomocą metody AccountBudgetProposalService. Najczęstsze operacje zarządzania to aktualizowanie pól proposed_spending_limit_micros i proposed_end_date_time. Pełną listę pól, które można zmieniać, znajdziesz w dokumentacji AccountBudgetProposal.

Możesz zaktualizować istniejący budżet konta lub utworzyć zupełnie nowy. Obie opcje są pokazane tutaj.

Aktualizowanie istniejącego budżetu konta

Możesz zaktualizować istniejące pola budżetu konta, wysyłając obiekty AccountBudgetProposal z polem AccountBudgetProposalType ustawionym na UPDATE. Pamiętaj, że musisz też wskazać pola, które są aktualizowane, w argumencie update_mask operacji.

Poniższy fragment kodu pokazuje, jak zaktualizować proponowany limit wydatków w przypadku dotychczasowego budżetu konta.

Java
AccountBudgetProposal proposal = AccountBudgetProposal.newBuilder()
  .setProposalType(AccountBudgetProposalType.UPDATE)
  .setAccountBudget(accountBudget.getResourceName())
  .setProposedSpendingLimitMicros(
    accountBudget.getProposedSpendingLimitMicros() + increaseAmount)
  .build();

AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposal)
  .setUpdateMask(
      FieldMask.newBuilder().addAllPaths(Arrays.asList("proposed_spending_limit_micros")).build())
  .build();

// Send request to Google Ads API (not shown).
C#
AccountBudgetProposal proposal = new AccountBudgetProposal()
{
  ProposalType = AccountBudgetProposalType.Update,
  AccountBudget = accountBudget.ResourceName,
  ProposedSpendingLimitMicros = accountBudget.ProposedSpendingLimitMicros + increaseAmount
};

AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
{
  Create = proposal,
  UpdateMask = new FieldMask()
  {
    Paths = { "proposed_spending_limit_micros" }
  }
};

// Send request to Google Ads API (not shown).
PHP
$accountBudgetProposal = new AccountBudgetProposal([
  'proposal_type' => AccountBudgetProposalType::UPDATE,
  'account_budget' => $accountBudget->getResourceName(),
  'proposed_spending_limit_micros' =>
    $accountBudget->getProposedSpendingLimitMicros() + $increaseAmount
]);

$accountBudgetProposalOperation = new AccountBudgetProposalOperation();
$accountBudgetProposalOperation->setCreate($accountBudgetProposal);
$accountBudgetProposalOperation->setUpdateMask(
  FieldMasks::allSetFieldsOf($accountBudgetProposal)
);

// Send request to Google Ads API (not shown).
Python
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')

proposal = account_budget_proposal_operation.create
proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').AccountBudgetProposalType.UPDATE
proposal.account_budget = account_budget.resource_name
proposal.proposed_spending_limit_micros = account_budget.proposed_spending_limit_micros + increase_amount

field_mask = protobuf_helpers.field_mask(None, proposal._pb)
account_budget_proposal_operation.update_mask.CopyFrom(field_mask)

# Send request to Google Ads API (not shown).
Ruby
proposal = client.resource.account_budget_proposal
proposal.proposal_type = :UPDATE

mask = client.field_mask.with proposal do
  proposal.account_budget = account_budget.resource_name
  proposal.proposed_spending_limit_micros = account_budget.proposed_spending_limit_micros + increase_amount
end

operation = client.operation.account_budget_proposal do |op|
  op.create = proposal
  op.update_mask = mask
end

# Send request to Google Ads API (not shown).
Perl
my $account_budget_proposal =
  Google::Ads::GoogleAds::V26::Resources::AccountBudgetProposal->new({
    proposalType => UPDATE,
    accountBudget => $account_budget->{resourceName},
    proposedSpendingLimitMicros => $account_budget->{proposedSpendingLimitMicros} + $increaseAmount});

my $account_budget_proposal_operation =
  Google::Ads::GoogleAds::V26::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({
      create => $account_budget_proposal,
      updateMask => all_set_fields_of($account_budget_proposal)});

# Send request to Google Ads API (not shown).

Łączenie budżetów konta

Zamiast aktualizować istniejący budżet, Google Ads umożliwia połączenie wielu budżetów konta, które będą działać po sobie. W przykładzie poniżej klient ma różne limity wydatków w poszczególnych miesiącach.

Diagram przedstawiający łańcuch budżetów konta z różnymi limitami wydatków w poszczególnych miesiącach.
Przykład łańcucha budżetów konta.

Można to zrobić, tworząc 3 obiekty AccountBudgetProposal i wysyłając każdy obiekt AccountBudgetProposalOperation do AccountBudgetProposalService w osobnym żądaniu MutateAccountBudgetProposal (ponieważ MutateAccountBudgetProposalRequest akceptuje tylko 1 obiekt operation na wywołanie).

Poniższy fragment kodu pokazuje, jak utworzyć taki łańcuch za pomocą istniejącej konfiguracji płatności.

Java
AccountBudgetProposal proposalMay = AccountBudgetProposal.newBuilder()
  .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
  .setProposalType(AccountBudgetProposalType.CREATE)
  .setProposedName("May budget")
  .setProposedStartDateTime("2027-05-01 00:00:00")
  .setProposedEndDateTime("2027-06-01 00:00:00")
  .setProposedSpendingLimitMicros(1_000_000_000L)
  .build();

AccountBudgetProposalOperation operationMay = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposalMay)
  .build();

AccountBudgetProposal proposalJune = AccountBudgetProposal.newBuilder()
  .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
  .setProposalType(AccountBudgetProposalType.CREATE)
  .setProposedName("June budget")
  .setProposedStartDateTime("2027-06-01 00:00:00")
  .setProposedEndDateTime("2027-07-01 00:00:00")
  .setProposedSpendingLimitMicros(5_000_000_000L)
  .build();

AccountBudgetProposalOperation operationJune = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposalJune)
  .build();

AccountBudgetProposal proposalJuly = AccountBudgetProposal.newBuilder()
  .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
  .setProposalType(AccountBudgetProposalType.CREATE)
  .setProposedName("July budget")
  .setProposedStartDateTime("2027-07-01 00:00:00")
  .setProposedEndDateTime("2027-08-01 00:00:00")
  .setProposedSpendingLimitMicros(1_000_000_000L)
  .build();

AccountBudgetProposalOperation operationJuly = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposalJuly)
  .build();

// Send requests to Google Ads API, one MutateAccountBudgetProposal call per operation (not shown).
C#
AccountBudgetProposal proposalMay = new AccountBudgetProposal()
{
  BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
  ProposalType = AccountBudgetProposalType.Create,
  ProposedName = "May budget",
  ProposedStartDateTime = "2027-05-01 00:00:00",
  ProposedEndDateTime = "2027-06-01 00:00:00",
  ProposedSpendingLimitMicros = 1_000_000_000
};

AccountBudgetProposalOperation operationMay = new AccountBudgetProposalOperation()
{
  Create = proposalMay
};

AccountBudgetProposal proposalJune = new AccountBudgetProposal()
{
  BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
  ProposalType = AccountBudgetProposalType.Create,
  ProposedName = "June budget",
  ProposedStartDateTime = "2027-06-01 00:00:00",
  ProposedEndDateTime = "2027-07-01 00:00:00",
  ProposedSpendingLimitMicros = 5_000_000_000
};

AccountBudgetProposalOperation operationJune = new AccountBudgetProposalOperation()
{
  Create = proposalJune
};

AccountBudgetProposal proposalJuly = new AccountBudgetProposal()
{
  BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
  ProposalType = AccountBudgetProposalType.Create,
  ProposedName = "July budget",
  ProposedStartDateTime = "2027-07-01 00:00:00",
  ProposedEndDateTime = "2027-08-01 00:00:00",
  ProposedSpendingLimitMicros = 1_000_000_000
};

AccountBudgetProposalOperation operationJuly = new AccountBudgetProposalOperation()
{
  Create = proposalJuly
};

// Send requests to Google Ads API, one MutateAccountBudgetProposal call per operation (not shown).
PHP
$proposalMay = new AccountBudgetProposal([
  'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
  'proposal_type' => AccountBudgetProposalType::CREATE,
  'proposed_name' => 'May budget',
  'proposed_start_date_time' => '2027-05-01 00:00:00',
  'proposed_end_date_time' => '2027-06-01 00:00:00',
  'proposed_spending_limit_micros' => 1000000000
]);
$operationMay = new AccountBudgetProposalOperation();
$operationMay->setCreate($proposalMay);

$proposalJune = new AccountBudgetProposal([
  'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
  'proposal_type' => AccountBudgetProposalType::CREATE,
  'proposed_name' => 'June budget',
  'proposed_start_date_time' => '2027-06-01 00:00:00',
  'proposed_end_date_time' => '2027-07-01 00:00:00',
  'proposed_spending_limit_micros' => 5000000000
]);
$operationJune = new AccountBudgetProposalOperation();
$operationJune->setCreate($proposalJune);

$proposalJuly = new AccountBudgetProposal([
  'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
  'proposal_type' => AccountBudgetProposalType::CREATE,
  'proposed_name' => 'July budget',
  'proposed_start_date_time' => '2027-07-01 00:00:00',
  'proposed_end_date_time' => '2027-08-01 00:00:00',
  'proposed_spending_limit_micros' => 1000000000
]);
$operationJuly = new AccountBudgetProposalOperation();
$operationJuly->setCreate($proposalJuly);

// Send requests to Google Ads API, one MutateAccountBudgetProposal call per operation (not shown).
Python
billing_setup_service = client.get_service('BillingSetupService')

may_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal_may = may_account_budget_proposal_operation.create
proposal_may.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').AccountBudgetProposalType.CREATE
proposal_may.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id)
proposal_may.proposed_name = 'May budget'
proposal_may.proposed_start_date_time = '2027-05-01 00:00:00'
proposal_may.proposed_end_date_time = '2027-06-01 00:00:00'
proposal_may.proposed_spending_limit_micros = 1000000000

june_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal_june = june_account_budget_proposal_operation.create
proposal_june.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').AccountBudgetProposalType.CREATE
proposal_june.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id)
proposal_june.proposed_name = 'June budget'
proposal_june.proposed_start_date_time = '2027-06-01 00:00:00'
proposal_june.proposed_end_date_time = '2027-07-01 00:00:00'
proposal_june.proposed_spending_limit_micros = 5000000000

july_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal_july = july_account_budget_proposal_operation.create
proposal_july.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').AccountBudgetProposalType.CREATE
proposal_july.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id)
proposal_july.proposed_name = 'July budget'
proposal_july.proposed_start_date_time = '2027-07-01 00:00:00'
proposal_july.proposed_end_date_time = '2027-08-01 00:00:00'
proposal_july.proposed_spending_limit_micros = 1000000000

# Send requests to Google Ads API, one MutateAccountBudgetProposal call per operation (not shown).
Ruby
operation_may = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
  proposal.proposal_type = :CREATE
  proposal.proposed_name = 'May budget'
  proposal.proposed_start_date_time = '2027-05-01 00:00:00'
  proposal.proposed_end_date_time = '2027-06-01 00:00:00'
  proposal.proposed_spending_limit_micros = 1_000_000_000
end

operation_june = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
  proposal.proposal_type = :CREATE
  proposal.proposed_name = 'June budget'
  proposal.proposed_start_date_time = '2027-06-01 00:00:00'
  proposal.proposed_end_date_time = '2027-07-01 00:00:00'
  proposal.proposed_spending_limit_micros = 5_000_000_000
end

operation_july = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
  proposal.proposal_type = :CREATE
  proposal.proposed_name = 'July budget'
  proposal.proposed_start_date_time = '2027-07-01 00:00:00'
  proposal.proposed_end_date_time = '2027-08-01 00:00:00'
  proposal.proposed_spending_limit_micros = 1_000_000_000
end

# Send requests to Google Ads API, one MutateAccountBudgetProposal call per operation (not shown).
Perl
my $may_proposal =
  Google::Ads::GoogleAds::V26::Resources::AccountBudgetProposal->new({
    billingSetup =>
      Google::Ads::GoogleAds::V26::Utils::ResourceNames::billing_setup(
      $customer_id, $billing_setup_id
      ),
    proposalType => CREATE,
    proposedName => "May budget",
    proposedStartDateTime => "2027-05-01 00:00:00",
    proposedEndDateTime => "2027-06-01 00:00:00",
    proposedSpendingLimitMicros => 1000000000
  });
my $may_operation =
  Google::Ads::GoogleAds::V26::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({create => $may_proposal});

my $june_proposal =
  Google::Ads::GoogleAds::V26::Resources::AccountBudgetProposal->new({
    billingSetup =>
      Google::Ads::GoogleAds::V26::Utils::ResourceNames::billing_setup(
      $customer_id, $billing_setup_id
      ),
    proposalType => CREATE,
    proposedName => "June budget",
    proposedStartDateTime => "2027-06-01 00:00:00",
    proposedEndDateTime => "2027-07-01 00:00:00",
    proposedSpendingLimitMicros => 5000000000
  });
my $june_operation =
  Google::Ads::GoogleAds::V26::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({create => $june_proposal});

my $july_proposal =
  Google::Ads::GoogleAds::V26::Resources::AccountBudgetProposal->new({
    billingSetup =>
      Google::Ads::GoogleAds::V26::Utils::ResourceNames::billing_setup(
      $customer_id, $billing_setup_id
      ),
    proposalType => CREATE,
    proposedName => "July budget",
    proposedStartDateTime => "2027-07-01 00:00:00",
    proposedEndDateTime => "2027-08-01 00:00:00",
    proposedSpendingLimitMicros => 1000000000
  });
my $july_operation =
  Google::Ads::GoogleAds::V26::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({create => $july_proposal});

# Send requests to Google Ads API, one MutateAccountBudgetProposal call per operation (not shown).

Zwróć uwagę na użycie AccountBudgetProposalType.CREATE w każdej propozycji. Spowoduje to utworzenie 3 osobnych budżetów, a nie 3-krotne zaktualizowanie tego samego budżetu.

Zakończ budżety konta

Budżety konta można zakończyć, gdy są aktywne, i całkowicie usunąć przed rozpoczęciem lub w trakcie oczekiwania na zatwierdzenie.

Zakończ aktywny budżet konta

Nie można usunąć aktywnego budżetu konta. Możesz jednak ustawić czas zakończenia na bieżącą godzinę. Najprostszym sposobem na osiągnięcie tego celu jest wysłanie oferty z AccountBudgetProposalType.END.

Poniższy fragment kodu pokazuje, jak zakończyć dotychczasowy budżet konta.

Java
AccountBudgetProposal proposal = AccountBudgetProposal.newBuilder()
  .setProposalType(AccountBudgetProposalType.END)
  .setAccountBudget(accountBudget.getResourceName())
  .build();

AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposal)
  .build();

// Send request to Google Ads API (not shown).
C#
AccountBudgetProposal proposal = new AccountBudgetProposal()
{
  ProposalType = AccountBudgetProposalType.End,
  AccountBudget = accountBudget.ResourceName
};

AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
{
  Create = proposal
};

// Send request to Google Ads API (not shown).
PHP
$accountBudgetProposal = new AccountBudgetProposal([
  'proposal_type' => AccountBudgetProposalType::END,
  'account_budget' => $accountBudget->getResourceName()
]);

$accountBudgetProposalOperation = new AccountBudgetProposalOperation();
$accountBudgetProposalOperation->setCreate($accountBudgetProposal);

// Send request to Google Ads API (not shown).
Python
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal = account_budget_proposal_operation.create
proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').AccountBudgetProposalType.END
proposal.account_budget = account_budget.resource_name

# Send request to Google Ads API (not shown).
Ruby
operation = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.proposal_type = :END
  proposal.account_budget = account_budget.resource_name
end

# Send request to Google Ads API (not shown).
Perl
my $account_budget_proposal =
  Google::Ads::GoogleAds::V26::Resources::AccountBudgetProposal->new({
    proposalType => END,
    accountBudget => $account_budget->{resourceName}
  });

my $account_budget_proposal_operation =
  Google::Ads::GoogleAds::V26::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({create => $account_budget_proposal});

# Send request to Google Ads API (not shown).

Odpowiada to zaktualizowaniu budżetu konta przez ustawienie daty i godziny zakończenia na TimeType.NOW.

Usuwanie zatwierdzonego budżetu konta przed czasem jego rozpoczęcia

Jeśli zaproponujesz budżet konta, który ma zacząć obowiązywać w przyszłości, możesz go całkowicie usunąć przed czasem rozpoczęcia, wysyłając propozycję typu AccountBudgetProposalType.REMOVE.

Poniższy fragment kodu pokazuje, jak usunąć istniejący przyszły budżet konta.

Java
AccountBudgetProposal proposal = AccountBudgetProposal.newBuilder()
  .setProposalType(AccountBudgetProposalType.REMOVE)
  .setAccountBudget(accountBudget.getResourceName())
  .build();

AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposal)
  .build();

// Send request to Google Ads API (not shown).
C#
AccountBudgetProposal proposal = new AccountBudgetProposal()
{
  ProposalType = AccountBudgetProposalType.Remove,
  AccountBudget = accountBudget.ResourceName
};

AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
{
  Create = proposal
};

// Send request to Google Ads API (not shown).
PHP
$accountBudgetProposal = new AccountBudgetProposal([
  'proposal_type' => AccountBudgetProposalType::REMOVE,
  'account_budget' => $accountBudget->getResourceName()
]);

$accountBudgetProposalOperation = new AccountBudgetProposalOperation();
$accountBudgetProposalOperation->setCreate($accountBudgetProposal);

// Send request to Google Ads API (not shown).
Python
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal = account_budget_proposal_operation.create
proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').AccountBudgetProposalType.REMOVE
proposal.account_budget = account_budget.resource_name

# Send request to Google Ads API (not shown).
Ruby
operation = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.proposal_type = :REMOVE
  proposal.account_budget = account_budget.resource_name
end

# Send request to Google Ads API (not shown).
Perl
my $account_budget_proposal =
  Google::Ads::GoogleAds::V26::Resources::AccountBudgetProposal->new({
    proposalType => REMOVE,
    accountBudget => $account_budget->{resourceName}
  });

my $account_budget_proposal_operation =
  Google::Ads::GoogleAds::V26::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({create => $account_budget_proposal});

# Send request to Google Ads API (not shown).
Wstecz
Konfiguracja płatności
Dalej
Faktura